myowngogl.blogg.se

1. FORMAT OS X MAVERICKS HOW TO
2. FORMAT OS X MAVERICKS INSTALL
3. FORMAT OS X MAVERICKS PC
4. FORMAT OS X MAVERICKS ISO

Ok now we have OS X and Windows installed but most likely booting OS X from the HDD won't work and instead you will need to use the USB/DVD.

FORMAT OS X MAVERICKS INSTALL

Press the install button and prepare to wait a while depending on your SSD/HDD. Now you should be back at the OS X install screen, This time we will actually install it, Follow the on screen wizard until you get to the HDD Select page then select the "Mavericks" disk but DO NOT PRESS NEXT/INSTALL instead press "Customize" and uncheck the option "GraphicsEnabler" located under the "Graphics" section. Once your at the install simply do a "Custom Install" and then install windows to the 1st Partition it will need to be formated to NTFS via the format button below prior to being installed.Īfter the install is complete go through the standard welcome screen and post install setup and then we can move on to installing Niresh's OS X 10.9 Installing Niresh OS X 10.9Īnd now we are on to the main event, Installing OS X.īoot to the Niresh USB/DVD and then at the prompt highlight "Niresh Mavericks" and simply type "amdfx GraphicsEnabler=No PCIRootUID=1 -v" and press "Enter" This is installed just like normal, Except you need to make sure it doesn't install the UEFI version (make sure to select the non UEFI DVD/USB entry from the boot menu) OK now the HDD is properly partitioned, We now move on to installing Windows. If you don't plan on dual booting you can skip to "Installing OS X 10.9".Īfter a short time it should start booting to the OS X installer, Select your language and then in the menu bar Select Utilities > Disk Utilities > Select the HDD you want to use > Partition > 2 Partitions and then set the 1st as MS-DOS (FAT) name it "Windows" and the 2nd as "Mac OS Extended (Journaled)" name it "Mavericks" now select "Options" and make sure it's set to "MBR (Master Boot Record)" then press "Apply"

We need to format the HDD with the partition type MBR (for some reason when i did this with windows it didn't work) to do this will shall boot to the Niresh USB/DVD and at the prompt highlight "Niresh Mavericks" and simply type "amdfx GraphicsEnabler=No PCIRootUID=1 -v" and press "Enter". So once you have the Bootable USB/DVD with Niresh on it we are ready to begin.

FORMAT OS X MAVERICKS HOW TO

I am not going to cover how to write the DMG file to a USB pen or DVD and instead will just link you to (Step 1a if your currently in OS X and 1b if your in Windows) Note: you don't need Windows if you don't want to dual boot Preparation

FORMAT OS X MAVERICKS ISO

A USB Pen (Niresh - 10.9 - Mavericks USB Version.zip) or Dual Layer DVD+R (Niresh - 10.9 - Mavericks ISO Version.zip).The following items will be required in order for this to work. Ok so although this guide is intended for install on the above hardware it may or may not work on other hardware, It will most likely work on the UD3, UD5 and UD7 motherboards aswell as most modern Radeon HD Graphics. Operating Systems: Windows 8 and OS X 10.9.1.Graphics Card: Sapphire AMD Radeon HD 7850 2GB OC Edition (1002 6819).Memory: Corsair Vengeance 8GB 1600Mhz (2x4gb).It will also show you how to dual boot windows and OS X and even run the same windows install inside of OS X with VMWare Fusion.īefore we start, Here is the exact specification i am using for my Hackintosh install.

FORMAT OS X MAVERICKS PC

Hey guys, Here is a guide on "How to install OS X 10.9 on a PC with a Gigabyte 990FXA Series Motherboard and AMD FX Series CPU".